HR Haze Remover

HR Stone Guard Haze Remover is a rapid-action cleaning agent designed to eliminate cement residue, grout stains, efflorescence, and various deposits on various surfaces. This advanced formulation is suitable for both indoor and exterior use on porcelain, ceramic, sandstone, York Stone, honed sandstone, bricks and blocks, granite, and Victorian tiles. It offers swift and effective stain removal, saving time and effort.

To use HR Stone Guard Haze Remover, follow these simple steps:

1. Surface testing: Conduct a small, inconspicuous test on the surface to ensure compatibility and determine the appropriate dilution ratio. The product is safe for most surfaces listed above but avoid using it on acid-sensitive types.

2. Dilution: For light stains, dilute HR Haze Remover at a 3 parts water to 1 part solution. For tough stains, use the product neat (undiluted) for maximum strength.

3. Application: Apply the diluted or neat solution using a brush, sponge, or spray, ensuring even coverage over the stained area. Allow the solution to dwell for a few minutes but avoid letting it dry on the surface.

4. Agitation: Gently agitate the area with a scrub brush for stubborn stains to enhance the cleaning action. Thoroughly rinse the treated area with clean water to remove the residue.

5. Final inspection: After rinsing, inspect the treated area to ensure complete stain removal. Repeat the process if necessary.

Note: Always read and follow the product’s instructions and safety guidelines. It is recommended to wear appropriate personal protective equipment during use.

HR Stone Guard Haze Remover is your go-to solution for tackling tough stains on various surfaces with its rapid action and advanced formulation, achieving a pristine, stain-free finish effortlessly. Elevate your cleaning routine with the power of HR Haze Remover and bid farewell to stubborn stains.